List of Figures
| Table of Contents | List of Figures | List of Tables |
- Figure 1-1. DMF with SGI 400 VTL as Permanent Storage
- Figure 1-2. DMF with SGI 400 VTL as a Fast-Mount Cache
- Figure 1-3. SGI 400 VTL as Permanent Storage: Migrating
File Data
- Figure 1-4. SGI 400 VTL as Permanent Storage: Freeing and
Recalling File Data
- Figure 1-5. SGI 400 VTL as a Fast-Mount Cache: Migrating
File Data
- Figure 1-6. SGI 400 VTL as a Fast-Mount Cache: Freeing
and Recalling File Data
- Figure 1-7. Sample Configuration for SGI 400 VTL as Permanent
Storage
- Figure 1-8. Sample Configuration for SGI 400 VTL as a Fast-Mount
Cache
- Figure 2-1. Replace the Filesystem Name
- Figure 3-1. Adding the VTL Server
- Figure 3-2. Connecting to the VTL Server
- Figure 3-3. Determine the Total Size of the RAID Set
- Figure 3-4. Create a New Virtual Library
- Figure 3-5. Select a Shelf
- Figure 3-6. Specify the Library Vendor and Name
- Figure 3-7. Enter Virtual Drive Information
- Figure 3-8. Enter the Barcode Information
- Figure 3-9. Finish Creating the Library
- Figure 3-10. Select Physical Devices
- Figure 3-11. Enter the Number of Tapes to Be Configured
- Figure 3-12. Verify and Create Tapes
- Figure 3-13. Delete Selected Migration Tapes to Free Space
Needed for Dumps (4.5 GUI)
- Figure 3-14. Confirm the Deletion of a Tape on SGI-C00
- Figure 3-15. Selecting Tapes to Delete (7.5 GUI)
- Figure 3-16. Delete Tapes in the 7.5 VTL GUI
- Figure 3-17. Select the Initiator WWPN
- Figure 3-18. Relationship of the "Initiator WWPN" Field
to the DMF Server Port
- Figure 3-19. Verify the DMF Server as the Client
- Figure 3-20. Select the Library to Assign to the SAN
- Figure 3-21. Relationship of the "Name" Field to the SGI
400 VTL
- Figure 3-22. Select a Fibre Channel Target
- Figure 3-23. Relationship of the Target WWPN
Field to the SGI 400 VTL Port
- Figure 3-24. Verify that the Initiator and Target WWPNs
Correspond
- Figure 3-25. Relationships Among the Library, the DMF Server
Initiator WWPN, and the VTL Target WWPN
- Figure 4-1. Change Tape Properties
- Figure 4-2. Menu to Change Tape Properties in VTL 7.5 GUI
- Figure 4-3. Set the Maximum Capacity for Dump Tape Size
- Figure B-1. Enabling Compression