Table C-1 and Figure C-1 through Figure C-46 describe the SIMM upgrades required to install additional memory to an existing configuration.
Table C-1. Memory Upgrade Requirements
Starting Memory Size | 128 MB | 256 MB | 512 MB | 640 MB | 1024 MB | 1280 MB | 2048 MB |
|---|---|---|---|---|---|---|---|
64 MB
| See Figure C-1. | For Two-way interleaving, see Figure C-2. For Four-way interleaving, see Figure C-3. | For Four-way interleaving, see Figure C-4. For Eight-way interleaving, see Figure C-5. | See Figure C-6. | See Figure C-7. | See Figure C-8. | See Figure C-9. |
128 MB | N/A | For Two-way interleaving, see Figure C-10. For Four-way interleaving, see | For Four-way interleaving, see Figure C-12. For Eight-way interleaving, see Figure C-13. | See Figure C-14. | See Figure C-15. | See Figure C-16. | See Figure C-17. |
256 MB | N/A | N/A | From 256 MB (Two-way) to 512 (Two-way), see Figure C-18. From 256 MB (One-way) to 512 MB (Two-way), seeFigure C-19. To go from 256 MB (Two-way) to 512 MB (Four-way), see Figure C-20. From 256 MB (Four-way) to 512 MB (Four-way), see Figure C-21. | See Figure C-22. | From 256 MB (One-way) to 1024 MB (Two-way), see Figure C-23. From 256 MB (Two-way) to 1024 MB (Eight-way), see Figure C-24. From 256 MB (Four-way) to 1024 MB (Eight-way), see Figure C-25. | From 256 MB (One-way) to 1280 MB, see Figure C-26. From 256 MB (Two-way) to 1280 MB, see From 256 MB (Four-way) to 1280 MB, see. | From 256 MB (Two-way) to 2048 MB (Eight-way) see Figure C-29. From 256 (Four-way) to 2048 MB (Eight-way), see |
512 MB | N/A | N/A | N/A | See Figure C-31. | From 512 MB (Two-way) to 1024 MB (Two-way), see Figure C-32. From 512 MB (Four-way) to 1024 MB (Eight-way), see Figure C-33. From 512 MB (Four-way) to 1024 MB (Four-way), see From 512 MB (Eight-way) to 1024 MB (Eight-way), see | From 512 MB (Two-way) to 1280 MB (Four-way), see Figure C-36.
| From 512 MB (Four-way) to 2048 MB (Eight-way), see Figure C-37. From 512 MB (Eight-way) to 2048 MB (Eight-way), see |
640 MB | N/A | N/A | N/A | N/A | See Figure C-39. | See Figure C-40. | See Figure C-41. |
1024 MB | N/A | N/A | N/A | N/A | N/A | See Figure C-42. | From 1024 MB (Two-way to 2048 MB (Four-way), see Figure C-43. From 1024 MB (Four-way) to 2048 MB (Four-way), see Figure C-44. From 1024 MB (Eight-way) to 2048 MB (Eight-way), see Figure C-45.
|
1280 MB | N/A | N/A | N/A | N/A | N/A | N/A | See Figure C-46. |
![]() | Note: Add 64 MB using one bank of high-density SIMMs (4 x 16 MB) into bank B. |
![]() | Note: Add 192 MB using three banks of high-density SIMMs (12 x 16 MB) into banks B, C, and D. |
![]() | Note: Add 192 MB using three banks of high-density SIMMs (12 x 16 MB) into banks A and B on two MC3 boards. |
![]() | Note: Add 448 MB using seven banks of high-density SIMMs (28 x 16 MB) into banks A, B, C, and D on two MC3 boards. |
![]() | Note: Add 448 MB using seven banks of high-density SIMMs (28 x 16 MB) into banks A and B on four MC3 boards. |
![]() | Note: Add 576 MB using one bank of high-density SIMMs (4 x 16 MB) into banks A and B and two banks of very high-density SIMMS (8 x 64 MB) into banks C and D. |
![]() | Note: Add 960 MB using 15 banks of high-density SIMMs (60 x 16 MB) into banks A, B, C, and D on four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1216 MB using three banks of high-density SIMMs (12 x 16 MB) into bank B of the first MC3 board and into banks A and B on the second MC3 board. Then add four banks of very high-density SIMMs (16 x 64 MB) in banks C and D on the two MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1984 MB using 31 banks of high-density SIMMs (124 x 16 MB) into banks A, B, C, D, E, F, G, and H on four MC3 boards. |
![]() | Note: Add 128 MB using two banks of high-density SIMMs (8 x 16 MB) into banks C and D. |
![]() | Note: Add 128 MB using two banks of high-density SIMMs (8 x 16 MB) into banks A and B on a second MC3 board. |
![]() | Note: Add 384 MB using six banks of high-density SIMMs (24 x 16 MB) into banks A, B, C, and D on two MC3 boards. |
![]() | Note: Add 384 MB using six banks of high-density SIMMs (24 x 16 MB) into banks A, B, C, and D on three more MC3 boards. Eight-way interleaving requires four MC3s. |
![]() | Note: Add 512 MB using two banks of very high-density SIMMS (8 x 64 MB) into banks C and D. |
![]() | Note: Add 896 MB using 14 banks of high-density SIMMs (56 x 16 MB) into banks A, B, C, and D on four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1152 MB using two banks of high-density SIMMs (8 x 16 MB) into banks A and B on a second MC3 board. Then add four banks of very high-density SIMMs (16 x 64MB) into banks C and D of both MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1920 MB using 30 banks of high-density SIMMs (120 x 16 MB) into all the banks (A through H) on four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 256 MB using four banks of high-density SIMMs (16 x 16 MB) into the remaining banks (E,F, G, and H) on the MC3 board. |
![]() | Note: Add 256 MB using one bank of very high-density SIMMs (4 x 64 MB) into bank B. |
![]() | Note: Add 256 MB using four banks of high-density SIMMs (16 x 16 MB) into banks A and B on a second MC3 board. |
![]() | Note: Add 256 MB using four banks of high-density SIMMs (16 x 16 MB) into banks C and D on two MC3 boards. |
![]() | Note: Add 384 MB using one bank of very high-density SIMMS (4 x 64 MB) into bank B and two banks of high-density SIMMs (8 x 16 MB) into banks C and D. |
![]() | Note: Add 768 MB using three banks of very high-density SIMMS (12 x 64 MB) into banks B, C, and D. |
![]() | Note: Add 768 MB using 12 banks of high-density SIMMS (48 x 16 MB) into banks A, B, C, and D on three additional MC3 boards. Eight-way interleaving requires four MC3 boards. |
![]() | Note: Add 768 MB using 12 banks of high-density SIMMS (48 x 16 MB) into banks A, B, C, and D on two additional MC3 boards. Eight-way interleaving requires four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 256 MB using four banks of high-density SIMMS (16 x 16 MB) into banks C and D on two MC3 boards. Then add 768 MB using three banks of very high-density SIMMS (12 x 64 MB) into bank B on the first MC3 board and banks A and B on the second MC3 board. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Remove 128 MB of high-density SIMMs from banks A and B (8 x 16 MB) of the first MC3 board, and add them to Banks C and D on the second MC3 board. Then add 1024 MB using four banks of very high-density SIMMS (16 x 64 MB) into banks A and B of two MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1024 MB using four banks of very high-density SIMMs (16 x 64 MB) into banks C and D of both MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1792 MB of high-density SIMMS into all the available SIMM slots on 4 MC3 boards by adding 256 MB using four banks of high-density SIMMS (16 x 16 MB) into banks E, F, G, and H and the first MC3 board. Then add the remaining 1536 MB using 24 banks of high-density SIMMs (96 x 16 MB) into all the banks (A through H) on three additional MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1792 MB of high-density SIMMS into all the available SIMM slots on four MC3 boards by adding 768 MB using 12 banks of high-density SIMMS (48 x 16 MB) into banks C, D, E, F, G, and H on the first two MC3 boards. Then add the remaining 1024 MB using 16 banks of high-density SIMMs (64 x 16 MB) into all the banks (A through H) on two additional MC3 boards. |
![]() | Note: Add 128 MB using two banks of high-density SIMMS (8 x 16 MB) into banks C and D. |
![]() | Note: Add 512 MB using two banks of very high-density SIMMs (8 x 64 MB) into banks C and D. |
![]() | Note: Add 512 MB using sixteen banks of high-density SIMMs (64 x 16 MB) into banks A, B, C, and D on two additional MC3 boards. Eight-way interleaving requires four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 512 MB using eight bank s of high-density SIMMs (32 x 16 MB) into the remaining SIMM slots (banks E through H). |
![]() | Note: Add 512 MB using 16 banks (64 SIMMS) of high-density (16 MB) type into banks C and D on all four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 768 MB of high-density SIMMS into two MC3 board, by adding 128 MB of high-density SIMMs (8 x 16 MB) into banks C and D on the first MC3 board and another 128 MB of high-density SIMMs (8 x16) into banks C and D on the second MC3 board. Then add two banks of very high-density SIMMs (8 x 64) into banks A and B on the two MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1536 MB of high-density SIMMS into all the available SIMM slots on 4 MC3 boards by adding 512 MB using eight banks of high-density SIMMS (32 x 16 MB) into banks E, F, G, and H and the first two MC3 boards. Then add the remaining 1024 MB using 16 banks of high-density SIMMs (64 x 16 MB) into all the banks (A through H) on two additional MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1536 MB of high-density SIMMS into all the available SIMM slots on four MC3 boards by adding 512 MB using 24 banks of high-density SIMMS (96 x 16 MB) into banks C through H on all four boards. |
![]() | Note: Remove the two banks of high-density SIMMs (8 x 16 MB) and insert two banks of very high-density (8 x 64 MB) SIMMs into banks A and B. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 640 MB to a second MC3 board by adding two banks of high-density SIMMs (8 x 16 MB) and two banks of very high-density SIMMs (8 x 64 MB). |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Remove 128 MB of high-density SIMMs from Banks A and B on the first MC3 board. Add 1536 MB of very high-density SIMMS (24 x 64 MB) on banks A, B, C, and D of two MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 256 MB using four banks of high-density SIMMS (16 x 16 MB) to banks C and D on the two MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1024 MB using four banks of very high-density SIMMs (16 x 64 MB) into banks A and B on a second MC3 board. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1024 MB using four banks of very high-density SIMMs (16 x 64 MB) into banks B and D on each MC3 board. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Add 1024 MB using 16 banks of very high-density SIMMs (64 x 16 MB) on the remaining SIMM slots (banks D through H) on all four MC3 boards. |
![]() | Caution: This configuration is possible only on an MC3 board with a part number of 030-0245-008 or higher. |
![]() | Note: Remove the high-density SIMMs (sixteen total) and replace them with sixteen very high-density SIMMS (16 x 64 MB). |