This guide documents the Console Manager for SGIconsole software running on SGI systems.
The Console Manager software graphical interface allows you to control multiple SGI servers; SGI partitioned systems; and large, single-system image servers.
This manual contains the following chapters:
The following documents contain additional information that may be helpful:
SGIconsole Software CD Information Card
This guide describes how to install the software from the CD if at some time you need to reinstall it.
SGIconsole 2.x Start Here
Contains information about installing, configuring, and starting to use SGIconsole software.
IRISconsole to SGIconsole Migration Guide
This guide compares the SGIconsole software to the IRISconsole software.
SGI Origin 3000 Series Owner's Guide
This guide provides an overview, and describes how to set up and operate the SGI Origin 3000 series of servers.
SGI Origin 300 User's Guide
This guide provides an overview, and describes how to set up and operate the SGI Origin 300 server.
SGI L1 and L2 Controller Software User's Guide
This guide describes how to use the L1 and L2 controller commands at your system console to monitor and manage the following systems: SGI Origin 3000 series of servers, SGI Origin 300 series of servers, SGI Altix 3000 family of servers and superclusters, SGI Origin 300 systems with NUMAlink, SGI Onyx 3000 series of graphics systems, and the SGI Onyx 300 series of graphics systems.
SGI Onyx 300 Graphics System User's Guide
This guide provides an overview of the components that make up the SGI Onyx 300 graphics system and describes how to operate the system.
SGI Onyx 3000 Series Graphics System Hardware Owner's Guide
This guide provides information on using and administering your SGI Onyx 3000 rackmount graphics system. Although there several different models in the SGI Onyx 3000 system family, this guide refers to the products generically as SGI Onyx 3000 series graphics systems.
SGI Altix 3000 Series Owner's Guide
This guide provides an overview of the architecture and descriptions of the major components that compose the SGI Altix 3000 family of servers and superclusters. It also provides the standard procedures for powering on and powering off the system, basic troubleshooting information, and important safety and regulatory specifications.
SGI Altix 350 System User's Guide
Provides an overview of the Altix 350 system components, and it describes how to set up and operate this system.
SGI Altix 3700Bx2 User's Guide
This guide provides an overview of the architecture and descriptions of the major components that compose the SGI Altix 3700Bx2 family of servers. It also provides the standard procedures for powering on and powering off the system, basic troubleshooting information, and important safety and regulatory specifications.
Silicon Graphics Prism Visualization System User's Guide
Provides an overview of the Silicon Graphics Prism Visualization System components, and it describes how to set up and operate this system.
SGI Altix 350 Quick Start Guide
Guides a knowledgeable user through the installation, setup, and simple configuration of most SGI Altix 350 systems.
SGIconsole Hardware Connectivity Guide
This guide describes how to install the SGIconsole onto the SGI Origin 200, SGI Origin 2000, and SGI Origin 300, and SGI Origin 3000, SGI Altix 350, SGI Altix 3000, and Silicon Graphics Prism products.
Performance Co-Pilot ReadMe First
Information on the system requirements, installation, and preparation of the Performance Co-Pilot software.
Performance Co-Pilot for IRIX User's and Administrator's Guide
This guide describes the Performance Co-Pilot (PCP) software package of advanced performance tools for the SGI family of graphical workstations and servers. It documents the PCP features that are embedded in the IRIX operating system. It is a prequel to the Performance Co-Pilot for IRIX Advanced User's and Administrator's Guide.
Performance Co-Pilot for IRIX Advanced User's and Administrator's Guide
This guide describes the planning, deployment, and use of PCP tools and services, demonstrating the advanced capabilities of PCP, and how to employ, customize, and extend them for identifying and solving various computing performance problems.
Performance Co-Pilot Programmer's Guide
This guide describes how to write PCP extensions (Performance Metric Domain Agents, or PMDAs) using the PMAPI, for customizing and adapting PCP for the collection application performance data on operating system and application software components not addressed by the PCP base software.
Performance Co-Pilot for IA-64 Linux User's and Administrator's Guide
This guide documents the the Performance Co-Pilot (PCP) software package running on IA-64 Linux systems. PCP provides a systems-level suite of tools that cooperate to deliver integrated performance monitoring and performance management services spanning the hardware platforms, operating systems, service layers, Database Management Systems (DBMSs), and user applications.
You can obtain SGI documentation as follows:
See the SGI Technical Publications Library at http://docs.sgi.com. Various formats are available. This library contains the most recent and most comprehensive set of online books, release notes, man pages, and other information.
If it is installed on your SGI system, you can use InfoSearch, an online tool that provides a more limited set of online books, release notes, and man pages. With an IRIX system, enter infosearch at a command line or select Help -> InfoSearch from the Toolchest.
On IRIX systems, you can view release notes by entering either grelnotes or relnotes at a command line.
On Linux systems, you can view release notes on your system by accessing the README.txt file for the product. This is usually located in the /usr/share/doc/productname directory, although file locations may vary.
You can view man pages by typing man title at a command line.
The following conventions are used throughout this document:
| Convention | Meaning | |
| command | This fixed-space font denotes literal items such as commands, files, routines, path names, signals, messages, and programming language structures. | |
| variable | Italic typeface denotes variable entries and words or concepts being defined. | |
| user input | This bold, fixed-space font denotes literal items that the user enters in interactive sessions. (Output is shown in nonbold, fixed-space font.) | |
| [ ] | Brackets enclose optional portions of a command or directive line. | |
| GUI | This font denotes the names of graphical user interface (GUI) elements such as windows, screens, dialog boxes, menus, toolbars, icons, buttons, boxes, fields, and lists. | |
| ... | Ellipses indicate that a preceding element can be repeated. |
If you have comments about the technical accuracy, content, or organization of this publication, contact SGI. Be sure to include the title and document number of the publication with your comments. (Online, the document number is located in the front matter of the publication. In printed publications, the document number is located at the bottom of each page.)
You can contact SGI in any of the following ways:
Send e-mail to the following address:
Use the Feedback option on the Technical Publications Library Web page:
Contact your customer service representative and ask that an incident be filed in the SGI incident tracking system.
Send mail to the following address:
| Technical Publications |
| SGI |
| 1500 Crittenden Lane, M/S 535 |
| Mountain View, California 94043-1351 |
SGI values your comments and will respond to them promptly.