List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. System Block Diagram

Figure 1-2. Front Controls and Indicators

Figure 1-3. Rear Panel I/O Ports and Features

Figure 1-4. SGI 1100 Server Internal Components

Figure 2-1. Removing the Chassis Cover

Figure 2-2. Placing the Chassis Cover on the Chassis

Figure 2-3. Removing the Front Panel

Figure 2-4. Removing the Link Bar

Figure 2-5. Installing the Link Bar

Figure 2-6. Detaching the Riser Card from the Link Bar

Figure 2-7. Installing the Riser Card on the Link Bar

Figure 2-8. Removing the Expansion Slot Filler Plate

Figure 2-9. Inserting the Expansion Card into the Riser Card

Figure 2-10. Removing the Chassis Fan Cage

Figure 2-11. Installing the Chassis Fan Cage

Figure 2-12. Removing the Chassis Fan

Figure 2-13. Location of the Rear System Blower Cable Connectors

Figure 2-14. Rear System Blower Securing Screws

Figure 2-15. Location of the LED Cable Connectors

Figure 2-16. Installing the LED Cable Module

Figure 2-17. Location of the Power Switch Cable Connector

Figure 2-18. Removing the Power Switch Cable Module

Figure 2-19. Installing the Power Switch Cable Module

Figure 2-20. Location of the USB Daughterboard Cable Connector

Figure 2-21. Removing the USB Daughterboard Cable Module

Figure 2-22. Installing the USB Daughterboard Cable Module

Figure 2-23. Location of the Intrusion Alert Microswitch Cable Connector

Figure 2-24. Removing the Intrusion Alert Microswitch Cable Module

Figure 2-25. Installing the Intrusion Alert Microswitch Cable Module

Figure 2-26. Releasing the Signal Cable Retaining Strap

Figure 2-27. Disconnecting the Drive Module Signal Cables

Figure 2-28. Removing the Drive Module

Figure 2-29. Connecting the Drive Module Signal Cables

Figure 2-30. Removing the Diskette Drive from the Drive Module

Figure 2-31. Installing the Diskette Drive into the Drive Module

Figure 2-32. Removing the CD-ROM Drive Converter Board

Figure 2-33. Removing the CD-ROM Drive from the Drive Module

Figure 2-34. Installing the CD-ROM Drive into the Drive Module

Figure 2-35. Securing the CD-ROM drive to the Drive Module

Figure 2-36. Removing Hard Drive Cables

Figure 2-37. Removing Two of Four Hard Disk Drive Screws

Figure 2-38. Removing the Hard Disk Drive

Figure 2-39. Installing the Hard Disk Drive

Figure 2-40. Location of the System Board Power Supply Connector

Figure 2-41. Location of the Hard Drive Power Supply Connectors

Figure 2-42. Removing the Air Guide Plate

Figure 2-43. Removing the Plastic Plenum

Figure 2-44. Removing the Power Supply Module

Figure 2-45. Installing the Power Supply Module

Figure 2-46. Installing the Plastic Plenum

Figure 2-47. Installing the Metal Air Guide Plate

Figure 2-48. Removing a Processor

Figure 2-49. Installing the Processor

Figure 2-50. Location of the Fan/Heatsink Cable Connector

Figure 2-51. Installing a Processor Terminator Board

Figure 2-52. Removing a DIMM

Figure 2-53. Installing a DIMM

Figure 2-54. Replacing the CMOS Battery

Figure 2-55. Removing the System Board

Figure 2-56. Installing the System Board

Figure 3-1. Threshold Setting Levels

Figure A-1. System Board Layout

Figure A-2. CN15 Connector Settings

Figure C-1. Keyboard Port Pinout

Figure C-2. Mouse Port Pinout

Figure C-3. DB15 HD Port Pinout

Figure C-4. Serial Port Pinout

Figure C-5. USB Port Pinout

Figure C-6. Ethernet Port Pinout