This chapter summarizes the contents of the Triple Keyboard Option (TKO) kit (marketing code HU-TKO). Figure 1-1 shows all TKO components.
 | Note: If parts are missing or if the kit contains incorrect parts, log a call with TAC. |
Table 1-1 lists part numbers and quantities for TKO components.
Table 1-1. TKO Component Part Numbers
Component | Part Number | Quantity |
|---|---|---|
Daughtercard (PCB ASSY, IO4 Adapter) | 030-0340-002 | 2 |
Filterboard/panel assembly | 013-1017-001 | 2 |
Keyboard auxiliary ribbon cable | 018-0480-001 | 2 |
Modified 24W7 | 018-0482-001 | 2 |
Jumper cable (black and white twisted coax) | 018-0485-001 | 2 |
Keyboard/mouse assembly | 013-0657-001 | 2 |
75-foot video and keyboard extension cable,
marketing code X8-VKC1, includes |
| 3 |
Label sheet for I/O panel plates | 024-0860-001 | 1 |
Table 1-2 lists the marketing codes for products the customer must order to fit an Onyx rackmount with RealityEngine2 with two keyboards or three keyboards.
Table 1-2. Marketing Codes Associated with TKO
Total Keyboards |
| Marketing Code | Description |
|---|---|---|---|
2 | 3 |
|
|
1 | 1 | HU-TKO | Triple Keyboard Option |
0 | 1 | HU-PC2 | IO4 required for third keyboard |
1 | 2 | D-M21OPT or D-M20A | Monitor |
1 | 1 | SC4-TKO-5.2 | Software CD-ROM |
Note the following:
The software for the TKO is a separate marketing code, not structured to the TKO itself. This software is IRIX 5.2 with modifications that support the TKO.
The third IO4 is required for the third keyboard. Installing this board and its I/O panel are part of the TKO installation process. Make sure you know how to install the IO4, its panel, and cable; review or bring the CHALLENGE™/Onyx Rackmount Installation Instructions (108-7042-xxx) if necessary.