This guide describes the installation of a VPro Dual Head graphics upgrade in a Silicon Graphics Octane2 workstation. It also provides information about using and troubleshooting the Dual Head system and contains programming notes for developers. The guide is organized as follows:
This section provides additional hardware information, software and system administration information, and product support information.
Chapter 1, “Installing Dual Head Graphics In An Octane2” provides installation instructions for the Octane2 Dual Head graphics assembly as well as information about the XIO module and graphics boards.
Chapter 2, “Connecting the Monitors” provides information about connecting the monitors.
Chapter 3, “Installing the Software and Using the Dual Head System” provides information about installing the software and using the Dual Head system.
Chapter 4, “Troubleshooting” provides troubleshooting information.
Chapter 5, “Removing Dual Head Graphics From An Octane2” provides information about removing the Octane2 Dual Head graphics assembly.
Appendix A, “Checking for VPro Dual Head Readiness” helps you determine if your Octane or Octane2 system is ready for a VPro Dual Head graphics upgrade.
Appendix B, “Care and Cleaning of Compression Connectors” provides information about the care and cleaning of the compression connectors.
Appendix C, “Choosing a Graphics Head (for Developers)” provides information about choosing a graphics head (for software developers).
An Index completes this guide.
It is always a good idea to back up your system before installing a new board. If you have not backed up your system recently, take this opportunity to do so. For instructions on backing up your system, see the Personal System Administration Guide.
The Octane2 Dual Head upgrade may only be installed in Octane systems that meet certain minimum requirements. To determine if your Octane system meets these requirements, refer to Appendix A, “Checking for VPro Dual Head Readiness”.
A listing of available configurati ons (upgrades and options) is available on the following SGI website:
http://www.sgi.com/workstations/octane2/
The following documents contain additional information that may be helpful:
Octane2 Workstation Owner's Guide
Personal System Administration Guide
To obtain SGI documentation, go to the SGI Technical Publications Library at:
http://techpubs.sgi.com
The Octane2 workstation is designed so that you can maintain and repair the workstation without the help of a trained technician. Contact your SGI subsidiary or authorized distributor for information about product support.
SGI provides a comprehensive range of product support for its products. If you are in North America and would like support for your SGI supported products, contact the Technical Assistance Center at 1 800 800 4SGI or your authorized service provider. If you are outside North America, contact the SGI subsidiary or authorized distributor in your country.
The following conventions are used throughout this document:
Convention | Meaning |
command | This fixed-space font denotes literal items such as commands, files, routines, path names, signals, messages, and programming language structures. |
variable | Italic typeface denotes variable entries and words or concepts being defined. |
user input | This bold, fixed-space font denotes literal items that the user enters in interactive sessions. Output is shown in nonbold, fixed-space font. |
[] | Brackets enclose optional portions of a command or directive line. |
... | Ellipses indicate that a preceding element can be repeated. |
manpage(x) | Man page section identifiers appear in parentheses after man page names. |
If you have comments about the technical accuracy, content, or organization of this document, please tell us. Be sure to include the title and document number of the manual with your comments. (Online, the document number is located in the front matter of the manual. In printed manuals, the document number is located at the bottom of each page.)
You can contact us in any of the following ways:
Send e-mail to the following address:
[email protected] |
Use the Feedback option on the Technical Publications Library World Wide Web page:
http://techpubs.sgi.com |
Contact your customer service representative and ask that an incident be filed in the SGI incident tracking system.
Send mail to the following address:
Technical Publications
SGI
1600 Ampitheatre Parkway, M/S 535
Mountain View, California 94043-1351
Send a fax to the attention of “Technical Publications” at +1 650 932 0801.
We value your comments and will respond to them promptly.