The SGI 1200 server is shipped in a rack, or ready for rack mounting.
Table 1-1 provides site preparation information for a single SGI 1200 chassis.
Table 1-1. Cooling and Power Requirements
As shown in Figure 1-1, the airflow in the server chassis flows through the mesh grill at the front of the chassis through the power supply, and over the motherboard. The hot air exhausts out the back of the chassis.
 | Caution: Always keep at least 2 inches (5.1 cm) of clearance at the back of the chassis for cooling. |
Table 1-2 lists physical and environmental specifications.
Table 1-2. Physical and Environmental Specifications
Specification | Value Per Server |
|---|---|
| |
Any, with 2” (5.1 cm) clearance at back | |
Heat Dissipation | 859 BTU per hour maximum |
| |
| |
| |
| |
| |
|