List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 2-1. Locating the XIO Module

Figure 2-2. Checking Your Shipment

Figure 2-3. Powering Off the OCTANE Workstation

Figure 2-4. Removing the Monitor Cable

Figure 2-5. Attaching the Wrist Strap

Figure 2-6. Identifying the Compression Connector

Figure 2-7. Removing the XIO Module Screws

Figure 2-8. Releasing the XIO Module

Figure 2-9. Removing the XIO Module

Figure 2-10. Placing the XIO Module on Its Side

Figure 2-11. Placing a Cap on the XIO Compression Connector

Figure 2-12. Identifying the Graphics Board

Figure 2-13. Installing the Texture Memory Option Board on the OCTANE/SI (or SE) Graphics Board

Figure 2-14. Locating the Connectors for the Texture Memory Option Board on the OCTANE/SSI (or SSE) Graphics Board

Figure 2-15. Installing the Texture Memory Option Board on the OCTANE/SI or SE Graphics Board

Figure 2-16. Inserting the Nylon Screw

Figure 2-17. Removing the Screw Holding the Texture Memory Option Board to the I/O Panel

Figure 2-18. Releasing the Texture Memory Option Board From the Graphics Board

Figure 2-19. Removing the Texture Memory Option Board

Figure 2-20. Installing the Slots A and D on the XIO Module Toward the Interior of the OCTANE Workstation

Figure 2-21. Positioning the XIO Module

Figure 2-22. Inserting the XIO Module

Figure 2-23. Replacing the XIO Module Screws

Figure 2-24. Replacing the Monitor Cable

Figure 2-25. Powering On the OCTANE Workstation

Figure 2-26. Rear View of the OCTANE Workstation

Figure A-1. OCTANE/SI or SE Graphics Board

Figure A-2. OCTANE/SI or SE Board With the Texture Memory Option Board

Figure A-3. OCTANE/SSI or SSE Graphics Board

Figure A-4. OCTANE/MXI or MXE Graphics Board

Figure B-1. Identifying the Bristled Pad of the Compression Connector

Figure B-2. Spraying the Compression Connector