This chapter summarizes the contents of the Triple Keyboard Option (TKO) kit (marketing code HU-TKO). Figure 1-1 shows all TKO components.
 | Note: If parts are missing or if the kit contains incorrect parts, log a call with TAC. |
Table 1-1 lists part numbers and quantities for TKO components.
Table 1-1. TKO Kit Component Part Numbers and Quantities
Component | Part Number | Quantity |
|---|---|---|
TKO for Infinite Reality Inst. Instructions | 108-xxxx-001 | 1 |
TKO Inst. Instructions (for RealityEngine2) | 108-0125-001 | 1 |
Daughtercard (PCB ASSY, IO4 Adapter) | 030-0340-002 | 2 |
TKO filterboard/panel assembly | 013-1017-001 | 2 |
Keyboard auxiliary ribbon cable | 018-0480-001 | 2 |
Keyboard/mouse assembly | 013-0657-001 | 2 |
75-foot video and keyboard extension cables,
marketing code X8-VKC1, includes |
| 3 |
Label sheet for I/O panel plates | 024-0860-001 | 1 |
NOT USED: Modified 24W7 cables | 018-0482-001 | 2 |
NOT USED: Jumper cable (black & white twisted) | 018-0485-001 | 2 |
Note the following:
The TKO kit contains some cables which are used only for RealityEngine2 installations (see Figure 1-1 and Table 1-1 for details). When the TKO option is installed in an InfiniteReality system, these cables may be discarded.
A third IO4 is required for the third keyboard. Since a third IO4 is already required for the third graphics pipe, this should not be an issue.