![[Book Summary]](./ArtCF/booksum10.gif)
![[Hardware Catalog]](./ArtCF/hwcat10.gif)
Origin TM Systems
: Preparing for an Installation
(File 4 of 10) - Last Modified: August 1999
SGI Origin 2000 computer systems and Onyx2 InfiniteReality2 computer systems consist of a variety of standard and optional equipment. The configuration of each computer system depends on customer requirements. Each system is air cooled and consists of three or more racks. In addition to the racks, your system may include SCSI RAID racks or Origin Fibre Channel racks. The SCSI RAID rack and the Origin Fibre Channel rack storage systems provide high-capacity, high-availability disk storage for the Origin 2000 computer system.
A typical Origin 2000 computer system contains the following components:
A typical Onyx2 InfiniteReality2 computer system contains the following components:
Figure 1 shows the Origin 2000 128- and 256-processor multirack system (standard and optional floor layouts) placed on 24 in. x 24 in. floor panels. Figure 2 shows the typical distance between racks (standard layout).
E-mail [email protected] to request full scale floor cutout templates of the standard and optional floor layouts.
NOTE: The optional floor layout for the Origin 2000 128-processor multirack system requires an "L" configuration panel/ground strap kit (SGI part number 026-1318-001). Contact your SGI account manager for ordering information.
Figure 1. Origin 2000 128- and 256-Processor Multirack Systems: Standard and Optional Floor Layouts Placed on 24 in. x 24 in. Floor Panels
Figure 2. Distance between Racks (Standard Layout)
|
This document or parts thereof may not be reproduced in any
form unless permitted by contract or by written permission. Silicon Graphics, Inc. Unpublished Proprietary Information - All Rights Reserved. |