List of Figures
| Table of Contents | List of Figures | List of Tables |
- Figure 1-1. Examples of Links Between HIPPI Nodes
- Figure 1-2. User and Control Data Carried by HIPPI-PH and HIPPI-Serial Links
- Figure 1-3. HIPPI Links and Connections
- Figure 1-4. HIPPI Packets and Bursts
- Figure 1-5. Routing Control Field With Logical Addressing
- Figure 1-6. Routing With Logical Addressing
- Figure 1-7. Routing Control Field (As Created by Sender) Source Addressing
- Figure 1-8. Switches and Port Identifiers
- Figure 1-9. Port Identifiers for Source Addressing
- Figure 1-10. Routing With Source Addressing
- Figure 1-11. How Switches Alter Source Addresses
- Figure 1-12. HARP Registration
- Figure 1-13. HARP Normal Operation
- Figure 1-14. I-field Format
- Figure 1-15. HIPPI-FP Packet Format
- Figure 1-16. FP Header Format
- Figure 1-17. Sample HIPPI-FP Packet
- Figure 1-18. Some Common HIPPI-FP Packets
- Figure 1-19. HIPPI Signals Used on Each Point-to-Point Connection
- Figure 1-20. Basic HIPPI Configuration
- Figure 1-21. Three Variations of the Basic Configuration
- Figure 1-22. HIPPI Fabric Configuration With One Switch
- Figure 1-23. HIPPI Fabric Configurations With Multiple Switches
- Figure 1-24. Complex HIPPI Fabric Configuration
- Figure 1-25. Data Direction Used in IRIS HIPPI-Serial Dual–SC Receptacle
- Figure 1-26. HIPPI Packet Created by IRIS HIPPI-LE
- Figure 2-1. Example of Multiple HARP Servers and Switch Port Configuration
- Figure 2-2. Template for Creating Logical Address I-Fields With Recommended Values
- Figure 2-3. Template for Creating Source Address I-Fields With Recommended Values
- Figure 3-1. Installing a Copper Loopback Link Using a HIPPI Cable
- Figure 3-2. Installing a Copper Loopback Link Using a Loopback Cable
- Figure 3-3. Fiber-optic Loopback Connector
- Figure 3-4. The /usr/etc/netstat -ina Display
- Figure 4-1. Error Message Format in /usr/var/adm/SYSLOG File