List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 2-1. Video Format Combiner Main Window
Figure 2-2. Select Format Window
Figure 2-3. Video Format Specified for Channel 0
Figure 2-4. Channel Attributes Window
Figure 2-5. Stacked Field Layout
Figure 2-6. Framebuffer
Figure 2-7. Run-Time Panning and Tile Boundaries
Figure 2-8. Combination Attributes Window
Figure 2-9. Channel Attributes Window
Figure 2-10. Combination Attributes Window
Figure 2-11. Framebuffer and Pixel Depth
Figure 2-12. Target Hardware Window
Figure 3-1. Encoder, Roaming in Channel 0
Figure 3-2. Encoder Channel Attributes Window
Figure 3-3. Varying the Width of the Filter
Figure 4-1. Sirius Video Channel Attributes Window
Figure 4-2. DVP Channel Attributes Window
Figure 4-3. GVO Channel Attributes Window
Figure A-1. Combiner Main Window
Figure A-2. Selecting a Channel Format
Figure A-3. Channel Attributes Window
Figure A-4. Combiner Main Window With Channels 0 and 1
Figure A-5. Combination Attributes Window
Figure A-6. Textport Error Message on the Main Window
Figure A-7. Combiner Main Window With Overlapping Channels
Figure A-8. Saving to Hardware Dialog Box
Figure A-9. Exit Warning Dialog Box
Figure A-10. Static Resize Selection
Figure A-11. Save a Combination
Figure 30. Color Burst and Chrominance Signal
Figure 31. Component Video Signals
Figure 32. Horizontal Blanking
Figure 33. Horizontal Blanking Interval
Figure 34. Waveform Monitor Readings With and Without Setup
Figure 35. Red or Blue Signal
Figure 36. Y or Green Plus Sync Signal
Figure 37. Video Waveform: Composite Video Signal With Setup (Typical NTSC)
Figure 38. Video Waveform: Composite Video Signal (Typical PAL)