List of Tables

| Table of Contents | List of Figures | List of Tables |

Table 2-1. Challenge RAID Configurations

Table 2-2. Error Recovery: Basic Configuration

Table 2-3. Error Recovery: Dual Interface/Dual-Processor Configuration

Table 2-4. Error Recovery: Split-Bus Configuration

Table 2-5. Error Recovery: Dual-Bus/Dual-Initiator Configuration

Table 3-1. Output of raidcli getagent

Table 3-2. Output of raidcli getdisk

Table 3-3. Output of raidcli getcrus

Table 3-4. Disk IDs

Table 3-5. Disk Module States

Table 3-6. Disk Module Statistics Window Entries

Table 3-7. Disk Module Errors Window Entries

Table 3-8. SP Summary Status Field

Table 4-1. Binding LUNs

Table 4-2. RAID Levels and LUN Parameters

Table 4-3. RAID Types in the LUN Information Window

Table 4-4. LUN States

Table 4-5. LUN Statistics Window Entries

Table 4-6. LUN Errors Window Entries

Table 5-1. Ordering Replacement Disk Modules

Table 5-2. Ordering Add-On Disk Module Sets

Table 7-1. Default Read/Write Cache Parameters

Table 7-2. Memory Partition Settings

Table 7-3. Read and Write Partition Sizes in MB: Firmware Revision 8.50 and Higher (No RAID-3 Memory Allocated)

Table 7-4. Read and Write Partition Sizes in MB: Firmware Revision 8.00-8.49

Table 7-5. SP Cache Summary Window Read Cache Entries

Table 7-6. SP Cache Summary Window Write Cache Entries

Table A-1. Challenge RAID Deskside Chassis Specifications

Table A-2. Challenge RAID Rack Specifications

Table B-1. raidcli Parameters

Table B-2. Output of raidcli getagent

Table B-3. Output of raidcli getcache

Table B-4. Output of raidcli getcrus

Table B-5. Output of raidcli getdisk

Table B-6. getlog Error Codes

Table B-7. Output of raidcli getlun

Table D-1. RAID-3 Differences Depending on Firmware Revision Level