List of Tables

| Table of Contents | List of Figures | List of Tables | List of Procedures |

Table 1-1. Comparison of ATM and Legacy Network Technologies

Table 1-2. SONET Line Rates

Table 1-3. Values for the IDI Field of ATM NSAP Addresses

Table 1-4. Mandatory ATM UNI Signaling Messages

Table 1-5. Default Transmission Rates on ATM-OC3c Queues

Table 2-1. Required Configuration Tasks

Table 2-2. Variables for the sigtest Utility

Table 3-1. Complete List of Configurable Parameters

Table 3-2. Configurable Parameters for the IRIS ATM-OC3c HIO Board

Table 3-3. Jumper-assigned Unit Numbers: Advantages and Disadvantages

Table 3-4. Software-assigned Unit Numbers: Advantages and Disadvantages

Table 3-5. Default Transmission Rates on ATM-OC3c Queues

Table 3-6. Files for Configuring Rate Queues

Table 3-7. IRIS ATM Driver Parameters

Table 3-8. Network Interface Parameters

Table 3-9. Formats for ATM NSAP Address in the ifatm.conf File

Table 3-10. Operational Parameters for ILMI Daemon

Table 3-11. Summary of IRIS ATM Files

Table 3-12. Stopping and Starting IRIS ATM Modules and Hardware

Table 4-1. Summary of IRIS ATM Status Information Displays

Table 4-2. Board Configuration Parameters

Table 4-3. ATM-OC3c Board States

Table 4-4. Receive Statistics: atmstat -r

Table 4-5. Transmit Statistics: atmstat -t

Table 4-6. SONET Statistics: atmstat -Sv

Table 4-7. Active Virtual Channel Information

Table 4-8. ATMARP Address Resolution Table Flags

Table 4-9. Driver Statistics: atmstat -dv

Table A-1. ATM UNI Cause Codes

Table A-2. SGI Cause Codes

Table A-3. ATM UNI Failure Locations

Table A-4. ATM UNI Diagnostics

Table B-1. Supported Rates in Payload Bits Per Second: 137 to 13 Mbps

Table B-2. Supported Rates in Payload Bits Per Second: 12.9 to 5 Mbps

Table B-3. Supported Rates in Payload Bits Per Second: 4.9 to 2.1 Mbps

Table B-4. Supported Rates in Payload Bits Per Second: 2.0 to 0.7 Mbps

Table B-5. Supported Rates in Payload Bits Per Second: 0.6 to 0.27 Mbps

Table B-6. Supported Rates in Payload Bits Per Second: 0.26 to 0.13 Mbps

Table B-7. Supported Rates in Payload Bits Per Second: 0.12 to 0.11 Mbps

Table C-1. Content for Fields of ATM NSAP Addresses

Table C-2. Meanings for Values in NSAP Fields