- address, see routing
- Routing
- API, see application programming interface
- Support for Upper Layer Applications
- application programming interface
- Application Programming Interface
- Support for Upper Layer Applications
- B bit, see FP header, Burst bit
- Packet and Flow Control
- bi-directional communication
- Basic HIPPI Configurations
- burst
- definition
- Packet and Flow Control
- Packet and Flow Control
- first
- Packet and Flow Control
- location of first byte of user data
- Packet and Flow Control
- short
- Packet and Flow Control
- BURST signal
- The Signals
- bypass functionality
- Editing the *.sm File
- cable, see physical link
- How HIPPI Works
- camp-on
- Connection Control
- Camp-on bit, see I-field
- Connection Control
- CCI, see I-field
- The I-field
- commands
- summary of
- Commands Available for IRIS HIPPI
- /usr/etc/hipcntl
- Commands Available for IRIS HIPPI
- /usr/etc/hipmap
- Commands Available for IRIS HIPPI
- /usr/etc/hiptest
- Commands Available for IRIS HIPPI
- configuring the IRIS HIPPI board
- Configure Board to Reject or Accept Connection Requests
- CONNECT signal
- The Signals
- Connection Control
- connection
- control
- Connection Control
- open
- How HIPPI Works
- How HIPPI Works
- rejections
- Connection Control
- connector
- Site Cabling
- control information
- The FP Header
- copper cable, see physical layer
- How HIPPI Works
- customer developed applications
- Application Programming Interface
- customer support
- Product Support
- customer-developed applications
- Support for Upper Layer Applications
- D bit, see I-field, Direction bit
- Source Addressing
- D1 data set
- created by IRIS HIPPI-LE module
- On Transmission
- definition
- The FP Header
- D2 data
- The FP Header
- data rate
- Packet and Flow Control
- How HIPPI Works
- destination
- address
- Source Addressing
- Logical Addressing
- definition
- HIPPI Terminology
- direction bit, see I-field
- Source Addressing
- driver configuration file, see /var/sysgen/master.d/if_hip
- Editing the if_hip File
- error checking
- Packet and Flow Control
- error message alphabetization rules
- Overview of the Error Message Listing
- error message format
- Overview of the Error Message Listing
- error message log file
- Overview of the Error Message Listing
- error messages
- Alphabetical Error Message Listing
- /etc/config/netif.options file
- IRIS HIPPI With IP Support
- The /etc/config/netif.options File
- /etc/hosts file
- IRIS HIPPI With IP Support
- The /etc/hosts File
- Ethernet address
- Editing the hippi.imap File
- fiber-optic cable, see physical layer
- How HIPPI Works
- files
- build BYPASS into driver, see /var/sysgen/system/hippi_s.sm file
- Editing the *.sm File
- build IP into driver, see /var/sysgen/system/hippi.sm or /var/sysgen/system/hippi_s.sm file
- Editing the *.sm File
- build modules into driver, see /var/sysgen/system/hippi.sm or /var/sysgen/system/hippi_s.sm file
- Editing the *.sm File
- driver configuration file, see /var/sysgen/master.d/if_hip
- IRIS HIPPI With IP Support
- error message file
- Overview of the Error Message Listing
- I-field to IP address mapping file, see /usr/etc/hippi.imap
- IRIS HIPPI With IP Support
- IP configuration files, see /etc/config/netif.options
- IRIS HIPPI With IP Support
- IP configuration files, see /etc/hosts
- IRIS HIPPI With IP Support
- log messages
- Overview of the Error Message Listing
- /usr/adm/SYSLOG
- Overview of the Error Message Listing
- flow control
- Packet and Flow Control
- FP header
- as created for IRIS HIPPI-LE module
- On Transmission
- Burst bit
- Packet and Flow Control
- The FP Header
- description of
- The FP Header
- format
- The FP Header
- how it is processed on reception
- On Reception
- Present bit
- The FP Header
- hipcntl command, see /usr/etc/hipcntl
- Commands Available for IRIS HIPPI
- hipmap command, see /usr/etc/hipmap
- Commands Available for IRIS HIPPI
- HIPPI
- basic configuration
- Basic HIPPI Configurations
- BYPASS support
- Editing the *.sm File
- compared to other network protocols
- HIPPI Configurations
- How HIPPI Works
- definition
- How HIPPI Works
- What is HIPPI?
- documentation
- The HIPPI Standards and Documentation
- IP support
- Editing the *.sm File
- switch
- How HIPPI Works
- HIPPI network
- configuration examples
- HIPPI Network Configurations
- HIPPI Network Configurations
- HIPPI Network Configurations
- description of
- HIPPI Network Configurations
- maximum number of endpoints
- HIPPI Network Configurations
- Logical Addressing
- maximum number of switches
- HIPPI Network Configurations
- Logical Addressing
- HIPPI signals
- BURST
- The Signals
- CONNECT
- The Signals
- Connection Control
- description of
- The Signals
- INTERCONNECT
- The Signals
- Connection Control
- PACKET
- The Signals
- Packet and Flow Control
- protocol for use of
- The HIPPI Standards and Documentation
- READY
- Packet and Flow Control
- REQUEST
- The Signals
- Connection Control
- HIPPI-FP packet
- commonly used formats
- The FP Header
- examples
- The FP Header
- format
- The FP Header
- The FP Header
- see also FP header
- The FP Header
- see also packet
- The FP Header
- HIPPI-FP standard
- The HIPPI Standards and Documentation
- HIPPI-IPI-3 standards
- The HIPPI Standards and Documentation
- HIPPI-LE standard
- The HIPPI Standards and Documentation
- HIPPI-PH standard
- The HIPPI Standards and Documentation
- HIPPI-SC standard
- The HIPPI Standards and Documentation
- HIPPI-Serial
- How HIPPI Works
- HIPPI-Serial standard
- The HIPPI Standards and Documentation
- hippi.imap file, see /usr/etc/hippi.imap
- Editing the hippi.imap File
- hippi.sm file, see /var/sysgen/system/hippi.sm file
- Editing the *.sm File
- hippi_s.sm file, see /var/sysgen/system/hippi_s.sm file
- Editing the *.sm File
- hiptest command, see /usr/etc/hiptest
- Commands Available for IRIS HIPPI
- hostname to I-field mapping, see /usr/etc/hippi.imap file
- Editing the hippi.imap File
- hosts, see /etc/hosts file
- IRIS HIPPI With IP Support
- how to
- build a driver without IP support
- IRIS HIPPI Without IP Support
- build driver with IP support
- IRIS HIPPI With IP Support
- change the I-field lookup table dynamically
- Change the Lookup Table That Maps IP Hosts to I-fields
- configure board
- Configure Board to Reject or Accept Connection Requests
- configure IP network interface dynamically
- Configure IP Network Interface Over IRIS HIPPI
- configure MTU
- Editing the if_hip File
- disable/enable board
- Disable or Enable IRIS HIPPI Board
- display current I-field lookup table
- Display the Lookup Table That Is Currently in Memory
- display status information
- Check Status
- enable/disable the IP network interface
- Disable or Enable an IP Interface
- install a loopback link
- Loopback Link for Challenge or Onyx Systems
- load new firmware
- Disable or Enable IRIS HIPPI Board
- maintain IRIS HIPPI subsystem
- Step-by-Step Instructions for Common Procedures
- map hostnames to I-fields
- Change the Lookup Table That Maps IP Hosts to I-fields
- map IP addresses to I-fields
- Change the Lookup Table That Maps IP Hosts to I-fields
- map IP names or addresses to I-fields
- Editing the hippi.imap File
- monitor IRIS HIPPI subsystem
- Step-by-Step Instructions for Common Procedures
- obtain HIPPI standards documentation
- The HIPPI Standards and Documentation
- set source timeout
- Set Timeout for Source Channel Connections
- shutdown the board
- Disable or Enable IRIS HIPPI Board
- troubleshoot a non-IP interface
- Troubleshoot the Board and Its HIPPI-FP Interface
- troubleshoot an IP network interface
- Troubleshoot an IP Interface
- troubleshoot the character device interface
- Troubleshoot the Board and Its HIPPI-FP Interface
- troubleshoot the IRIS HIPPI board
- Troubleshoot the Board and Its HIPPI-FP Interface
- verify presence of board in hardware inventory
- Verify That the Board Has Been Located by the Software
- verify that IP is enabled
- Troubleshoot an IP Interface
- verify the character device interface
- Verify the Board and Its HIPPI-FP Interface
- verify the IP network interface
- Verify an IP-over-HIPPI Interface
- verify the IRIS HIPPI board
- Verify That the Board Has Been Located by the Software
- verify the IRIS HIPPI subsystem
- Verifying the HIPPI Subsystem
- I-field
- Camp-on bit
- Connection Control
- description of
- The I-field
- Direction bit
- Logical Addressing
- Source Addressing
- Source Addressing
- Source Addressing
- format
- The I-field
- Path Selection bits
- Source Addressing
- Routing
- recommended values
- Editing the hippi.imap File
- recommended values
- On Transmission
- Routing Control field
- Routing
- Source Addressing
- template for creating
- Editing the hippi.imap File
- I-field to IP address mapping, see /usr/etc/hippi.imap file
- Editing the hippi.imap File
- IEEE 802.2 header
- On Reception
- On Transmission
- IEEE universal address
- Editing the hippi.imap File
- if_hip file, see /var/sysgen/master.d/if_hip
- Editing the if_hip File
- ifconfig command, see /usr/etc/ifconfig
- Commands Available for IRIS HIPPI
- INTERCONNECT signal
- The Signals
- Connection Control
- IP address to I-field mapping, see /usr/etc/hippi.imap file
- Editing the hippi.imap File
- IP checksumming
- Editing the if_hip File
- IP over HIPPI
- Basic HIPPI Configurations
- The HIPPI Standards and Documentation
- LLC header
- On Transmission
- log file, see files
- Overview of the Error Message Listing
- logical addressing
- assigned usages
- Logical Addressing
- description of
- Logical Addressing
- formats
- Logical Addressing
- maximum number of addresses
- Logical Addressing
- reserved addresses
- Logical Addressing
- size of address
- Logical Addressing
- use of
- Routing
- lookup table
- Editing the hippi.imap File
- loopback
- Verifying the HIPPI Subsystem
- MAC address
- Editing the hippi.imap File
- Editing the hippi.imap File
- maintaining
- Commands Available for IRIS HIPPI
- monitoring
- Commands Available for IRIS HIPPI
- MTU configuration
- Editing the if_hip File
- netif.options, see /etc/config/netif.options file
- IRIS HIPPI With IP Support
- netstat command, see /usr/etc/netstat
- Commands Available for IRIS HIPPI
- packet
- control
- Packet and Flow Control
- control information in
- The FP Header
- D1 area
- The FP Header
- D2 area
- The FP Header
- definition
- Packet and Flow Control
- format
- The FP Header
- The FP Header
- indeterminate size
- Packet and Flow Control
- infinite
- Packet and Flow Control
- maximum size
- Packet and Flow Control
- user data in
- The FP Header
- PACKET signal
- Packet and Flow Control
- The Signals
- Packet and Flow Control
- panel plate
- Site Cabling
- physical layer
- copper
- How HIPPI Works
- How HIPPI Works
- The HIPPI Standards and Documentation
- Site Cabling
- Basic HIPPI Configurations
- fiber\x15 optic
- How HIPPI Works
- The HIPPI Standards and Documentation
- Basic HIPPI Configurations
- How HIPPI Works
- Site Cabling
- standards
- The HIPPI Standards and Documentation
- The HIPPI Standards and Documentation
- physical link
- Site Cabling
- How HIPPI Works
- ping command, see /usr/etc/ping
- Commands Available for IRIS HIPPI
- port identifier
- Source Addressing
- product support
- Product Support
- PS bits, see I-field, Path Selection bits
- Routing
- READY signal
- Packet and Flow Control
- REQUEST signal
- The Signals
- Connection Control
- reserved addresses
- Logical Addressing
- RFC 1374
- On Transmission
- The HIPPI Standards and Documentation
- HIPPI Network Configurations
- routing
- description of
- Routing
- see also logical addressing
- Routing
- see also source addressing
- Routing
- routing control field, see I-field
- Source Addressing
- SC connector
- Site Cabling
- Silicon Graphics customer support
- Product Support
- SNAP header
- On Transmission
- software installation
- Introduction
- source
- definition
- HIPPI Terminology
- source addressing
- description of
- Source Addressing
- how address is changed by switches
- Source Addressing
- size of address
- Source Addressing
- use of
- Routing
- source channel timeout
- Set Timeout for Source Channel Connections
- status information
- Check Status
- Check Status
- status reports
- Check Status
- Check Status
- Interpreting Status Information
- Check Status
- support for upper layer applications
- Support for Upper Layer Applications
- switch
- description of
- HIPPI Network Configurations
- Connection Control
- How HIPPI Works
- maximum number in a network
- Logical Addressing
- SYSLOG file
- Overview of the Error Message Listing
- Overview of the Error Message Listing
- TCP/IP over HIPPI
- The HIPPI Standards and Documentation
- Basic HIPPI Configurations
- technical assistance center
- Product Support
- testing procedures
- Verifying the HIPPI Subsystem
- timeout for source connections
- Set Timeout for Source Channel Connections
- troubleshooting
- Troubleshoot the Board and Its HIPPI-FP Interface
- ULA
- Editing the hippi.imap File
- ULP
- Support for Upper Layer Applications
- universal IEEE address
- Editing the hippi.imap File
- user data
- The FP Header
- /usr/adm/SYSLOG file
- Overview of the Error Message Listing
- /usr/etc/hipcntl command
- Commands Available for IRIS HIPPI
- /usr/etc/hipmap command
- Commands Available for IRIS HIPPI
- Change the Lookup Table That Maps IP Hosts to I-fields
- /usr/etc/hippi.imap file
- Editing the hippi.imap File
- On Transmission
- /usr/etc/hiptest command
- Commands Available for IRIS HIPPI
- Verify the Board and Its HIPPI-FP Interface
- /usr/etc/ifconfig command
- Commands Available for IRIS HIPPI
- Disable or Enable an IP Interface
- Configure IP Network Interface Over IRIS HIPPI
- /usr/etc/netstat command
- Commands Available for IRIS HIPPI
- /usr/etc/ping command
- Verify an IP-over-HIPPI Interface
- Commands Available for IRIS HIPPI
- /usr/var/adm/SYSLOG file
- Overview of the Error Message Listing
- utilities
- Step-by-Step Instructions for Common Procedures
- /var/sysgen/master.d/if_hip file
- Editing the if_hip File
- /var/sysgen/system/hippi.sm file
- Editing the *.sm File
- IRIS HIPPI With IP Support
- IRIS HIPPI Without IP Support
- /var/sysgen/system/hippi_s.sm file
- IRIS HIPPI With IP Support
- Editing the *.sm File
- IRIS HIPPI Without IP Support
- verifying the IRIS HIPPI subsystem
- Verifying the HIPPI Subsystem
- word
- definition
- HIPPI Terminology