The messages listed in this appendix are displayed or printed in the log at different times during SNA communication operations. Many are informational and are sent to the logger to inform of normal system activities. The messages are grouped according to the following functional areas:
FSM Log Messages
System Error Log Messages
Node Activation Errors
Conversation Status Messages
Conversation Protocol Errors
Path Control Errors
Logical Unit Messages
Physical Unit Messages
Program Error Messages
Low-level Messages
Any required action that you need to take is noted after the message.
These messages record FSM state changes.
15000004: FSM %A, old state %B, line %C, new state %D, output code %E
A is FSM name
B is previous FSM state
C is line number
D is new FSM state
E is output code
21009001: %A: var %B, fsmin %C, state %D, new state %E, output %F
A is FSM name
B is variable name
C is input vector
D is previous FSM state
E is new FSM state
F is output vector
21009003: %A: convid %B, lvec %C, state %D, new state %E
A is FSM name
B is the conversation ID returned by the alcnv verb
C is input vector
D is previous FSM state
E is new FSM state
These messages log error information sent to the $LU62 by its partner node.
18000010: Error log record received on conversation %A.
A is conversation ID.
18000011: Error log record sent on conversation %A.
A is conversation ID.
18000012: Product: %A.
A is a string containing the product ID for the system sending the error.
18000013: Message: %A.
A is a string containing the error message.
The following messages are displayed if the node-activation program detects an error in the configuration. These errors are received when you generate a configuration or activate a local node. To recover, examine the indicated resource-definition block. The messages that deal with specific values also display the name of the block and the field in error. Normally, the resource-definition program displays the acceptable values and prohibits you from entering invalid information.
19000000: The keyword is not valid or no longer supported.
Action: The configuration file has been corrupted. Re-edit the configuration.
19000001: Minimum memory size is 50 (k).
Action: Re-edit the Local Node block.
19000002: The EXCHID must be exactly eight characters long.
Action: Re-edit the Local Node block.
19000003: YES or NO are the only valid values.
Action: Re-edit the indicated block.
19000004: Scheduler timer values from 1 to 60 (secs) are allowed.
Action: Re-edit the Local Node block.
19000005: Share-limit values from 1 to 254 are allowed.
Action: Re-edit the Local Node block.
19000010: The name size must be twenty characters or less.
Action: Re-edit the indicated block.
19000011: DEVICE required in the line BLOCK.
Action: Re-edit the Line block.
19000012: The line type must be either PRIMARY or SECONDARY.
Action: Re-edit the Line block.
19000013: Valid line connects are LEASED, SWITCHED, or MULTI.
Action: Re-edit the Line block.
19000014: The BTU size must range from 80 to 521 (bytes).
Action: Re-edit the Line block.
19000015: Valid modem rates are 300, 1200, 2400, 4800, 9600, 19,200, 56000.
Action: Re-edit the Line block.
19000017: Retry counts from 0 to 30 are allowed.
Action: Re-edit the Line block.
19000018: Idle time values from 100 to 10000 (msec) are allowed.
Action: Re-edit the Line block.
19000019: Non-productive receive values from 1000 to 30000 (msec) are allowed. Action: Re-edit the Line block.
19000020: The maximum I-frame values range from 1 to 7.
Action: Re-edit the Line block.
19000025: The SDLC address must be two hex characters.
Action: Re-edit the Station block.
19000029: The CPU_ID field must be exactly twelve characters long.
Action: Re-edit the Remote Node block.
19000030: The name field must be eight characters or less.
Action: Re-edit the indicated block.
19000031: LU_ID values range from 1 to 254.
Action: Re-edit the Local LU block.
19000043: Maximum transaction program values range from 1 to 255.
Action: Re-edit the Local LU block.
19000044: Wait values range from -1 (no maximum) to 3600 (secs).
Action: Re-edit the Local LU block.
19000062: Maximum session limits can range from 1 to 254.
Action: Re-edit the Mode block.
19000063: Valid session limit values range from 0 to 254.
Action: Re-edit the Mode block.
19000068: Maximum RU sizes range from 256 to 4096.
Action: Re-edit the Mode block.
19000069: Pacing counts can range from 0 to 21.
Action: Re-edit the Mode block.
19000072: Reinitialization values are OPER, PRILU, SECLU, or EITHER.
Action: Re-edit the Mode block.
19000074: Transaction program names must be sixty-four characters or less. Action: Re-edit the Transaction Program block.
19000081: Could not find configuration file.
Action: Check the name and permissions on the configuration file.
19000083: Message queue remove failed.
Action: Check the permissions on the Inter-process Communications (IPC) message queue. Remove the queue as superuser.
19000084: Message queue create failed.
Action: There are not enough system resources to start another node. If the problem persists, and no other nodes are active, re-boot the machine to clear out the stray message queues.
19000085: s2_schd failed to start.
Action: Reinitialize.
19000086: s2_init failed to start.
Action: Check pathnames and reinitialize.
19000087: The named station could not be found.
Action: Re-edit the Partner block.
19000088: The named line could not be found.
Action: Re-edit the Station block.
19000089: The named PU could not be found.
Action: Re-edit the Station block.
19000090: The local node has not been defined.
Action: Re-edit the configuration.
19000091: The named local LU could not be found.
Action: Re-edit the configuration.
19000092: The named partner LU could not be found.
Action: Re-edit the Partner block.
19000094: Only hex digits ( 0 - 9, A - F ) are valid.
Action: Re-edit the indicated block.
19000095: Cannot have CPU_ID and EXCHID.
Action: Edit the Remote Node block.
19000096: Must have CPU_ID or EXCHID.
Action: Edit the Remote Node block.
19000097: Maximum value is 7, Minimum value is 1.
Action: Edit the Line block.
19000098: Device file does not exist.
Action: Edit the Line block.
19000099: ALS_NAME cannot be 'LOCAL'.
Action: Rename the Station block to a name other than LOCAL.
19000100: Must have CNOSALS if PARALLEL SESSIONS=YES.
Action: Re-edit the Remote LU block.
19000101: Cannot have CNOSALS if PARALLEL SESSIONS=NO.
Action: Re-edit the Remote LU block.
19000102: Name is a required entry.
Action: Re-edit the indicated block.
19000103: Mode partner name must be defined before this keyword.
Action: Re-generate the configuration. If error persists, re-edit the Station block.
19000104: Local LU name must be defined before this keyword.
Action: Re-generate the configuration. If error persists, re-edit the configuration.
19000105: Minimum first speaker must be less than the session maximum.
Action: Re-edit the Mode block.
19000106: Prebound sessions must be less than the first-speaker sessions.
Action: Re-edit the Mode block.
19000107: Cannot have parallel sessions if this partner is a host.
Action: Re-edit the Partner block.
19000108: Mode cannot have parallel sessions if the partner LU does not.
Action: Re-edit the Partner block.
19000109: EXCHID required in node BLOCK.
Action: Re-edit the Local Node block.
19000110: LINE required in line BLOCK.
Action: Re-edit the Line block.
19000111: DEVICE required in line BLOCK.
Action: Re-edit the Line block.
19000112: NAME required in pu BLOCK.
Action: Re-edit the Remote Node block.
19000114: NAME required in als BLOCK.
Action: Re-edit the Station block.
19000115: LU_ID required in lucb BLOCK.
Action: Re-edit the Local LU block.
19000116: LNAM required in lucb BLOCK.
Action: Re-edit the Local LU block.
19000117: LU_NAM required in pacb BLOCK.
Action: Re-edit the Remote LU block.
19000118: RNAM required in pacb BLOCK.
Action: Re-edit the Remote LU block.
19000119: DEVICE not found.
Action: Re-edit the Line block.
19000120: Must be type A name.
Action: Re-edit the indicated block.
19000121: LU_NAME required in mocb BLOCK.
Action: Re-edit the Mode block.
19000122: RLU_NAME required in mocb BLOCK.
Action: Re-edit the Mode block.
19000123: MNAM required in mocb BLOCK.
Action: Re-edit the Mode block.
19000124: ALSNM required in mocb BLOCK.
Action: Re-edit the Mode block.
19000125: Options for SECACC are NONE, USERID, and VERIFIED.
Action: Re-edit the Remote LU block.
19000126: Must have less than eight Stations/Line.
Action: Reduce the number of stations using the same line.
19000127: Unnamed LU previously defined—only one allowed.
Action: Re-edit Local LU block.
19000128: Unnamed Partner previously defined—only one allowed per LU.
Action: Re-edit Remote LU block.
19000129: Blank Mode previously defined—only one allowed per LU/Partner.
Action: Re-edit Mode block.
19000130: LU_ID must be unique for each LU.
Action: Re-edit Local LU block.
19000131: Local name of transaction program is required.
Action: Re-edit Transaction Program block.
19000132: Only one tpcb block with LNAM=* allowed per lucb.
Action: Re-edit Transaction Program block.
19000133: Status must by ENABLE, TEMP, or PERM.
Action: Re-edit Transaction Program block.
19000134: Entry must be a decimal or hexidecimal number.
Action: Re-edit specified block.
19000135: Security must be NONE, USERID, VERIFIED.
Action: Re-edit Remote LU block.
19000200: Unable to start server processes. Activation terminated.
Action: The Server process, s2_schd, could not be started. If the environment variable STBIN is defined, see that it is set to a directory containing s2_schd (usually /usr/lib/lu62). If it is not defined, see that s2_schd is in your path. If you are using a shared-memory version of the product, reduce the size of the shared-memory segment to 50K. If the problem persists, and no other nodes are active, reboot the machine to clear out the stray shared-memory segments. If you are using a machine on which the maximum shared-memory is tunable, consult the system administrator for the maximum allowed segment size.
19000201: Error in Node definition. Activation terminated.
Action: Re-edit the Local Node block.
19000202: Error in PU definition. Activation terminated.
Action: Re-edit the Control Point block.
19000203: Error in Line definition. Activation terminated.
Action: Re-edit the Line block.
19000204: Error in Station definition. Activation terminated.
Action: Re-edit the Station block.
19000205: Error in Local LU definition. Activation terminated.
Action: Re-edit the Local LU block.
19000206: Error in Remote LU definition. Activation terminated.
Action: Re-edit the Remote LU block.
19000207: Error in Mode definition. Activation terminated.
Action: Re-edit the Mode block.
19000208: Error in TP definition. Activation terminated.
Action: Re-edit the Transaction Program block.
Low-level information messages giving conversation-initialization messages appear in the log only when severity is set to a low value.
21001001: Conversation started, convid %A.
A is the conversation ID returned by the alcnv verb.
21001002: Session allocated to convid %A, scbid = %B.
A is the conversation ID returned by the alcnv verb.
B is the session ID.
21001003: Conversation ended, convid %A.
A is the conversation ID returned by the alcnv verb.
21001004: Conversation failure, convid %A.
A is the conversation ID returned by the alcnv verb.
21001007: Receive error on convid %A, sense data %B.
A is the conversation ID returned by the alcnv verb.
B is sense data used by the transaction program initiator.
21000014: Invalid logical-record length.
A logical record was received or sent on a conversation with an invalid LL setting. Invalid settings are 0x0000, 0x8000, and 0x8001.
21000015: Invalid logical record—PS headers not supported.
A logical record was received with a length of 0x0001, indicating PS header follows. PS headers are not supported.
21000030: Unable to determine maj/min code from sense data %A
A is the sense data.
These messages are sent to the log when data arrives that is invalid under the rules of SNA. The messages usually indicate that a communications device is garbling the transmission, although they also occur when a partner node violates protocols.
31000010: Invalid PIU address.
32000010: 0x8005: local SCB not found.
32000020: 0x8007: daf 0x00 and BBIU, EBIU invalid.
32000025: Map to Canonical returned an error
32000030: 0x1002: mu is SC, but dcf < 4.
32000040: 0x8007: mu is SC and EBIU is invalid.
32000050: 0x8005: remote SCB not found.
32000060: SCB not found, discarded.
32000070: 0x8008
32000080: 0x8006
32000090: 0x800B
32000100: 0x4005
32000110: Case 1, mu is !BBIU
32000120: Case 2, mu is BBIU
32000121: Case 2, mu is !BBIU; discard PIU
32000122: Case 2, mu ldi==LOSTDATA; discard PIU
32000123: Case 2, pcp0235==NG; discard PIU
32000140: 0x8007: first segment, dcf < TH + RH + 1.
32000150: 0x800A: first segment, ldi = LOSTDATA.
32000160: 0x1002: no segment, mu is SC, dcf < 4.
32000170: No segment, ldi = LOSTDATA.
32000180: ALS inactive.
32000190: 0x0815: BIND request received for existing session.
32000211: Mu could not be returned, discarded.
32000220: ACTPU or DCTPU received but OAF not recognized
32000230: ACTLU or DCTLU received but OAF not recognized
These messages are sent to the log to inform you of LU activities. Many of them are informational only.
13000001: Message Queue %A Full—Queue Wraps.
A is the name of the message queue.
34000090: LU failure on attach - no TPI, unbind type 0x0C sent.
Action: This message is sent when the s2_tpi is not active but allocation requests are being received. If this occurs, deactivate, then reactivate, the local node. Be sure the s2_tpi process is running after the activation is complete.
34000170: Activate session failed.
34000180: No match found on scbid %A.
A is the session ID.
34000190: LU activation received for unknown LU, DAF= %A.
A is the destination address.
34000200: No match on CPID %A.
A is the CPID.
34000210: Function already active.
34000220: Received request from SSCP, but not locally active.
34000240: BIND failed; LU name %A not found.
A is the name of the remote LU.
34000250: Bind received but LU not active.
34000260: BIND received but partner name %A not recognized.
A is the name of the remote LU.
34000270: BIND received but mode %A not recognized.
A is the name of the mode.
34000280: Invalid BIND request received, rejected sense code= %A %B.
A is the SNA sense data.
B is sense data used by the transaction program initiator.
34000300: Invalid ACTLU received.
34000310: Bind rejected—security levels do not match.
34000320: Bad enciphered password in bind rsp—unbinding session.
34000330: Bad enciphered password in FMH-12—unbinding session.
34000340: Received request precedes required FMH-12—unbinding session.
34000350: Invalid FMH type received.
34000600: LU_PNCP session started for %A.
A is the LU name.
34000610: LU_SSCP session started for %A.
A is the LU name.
34000620: Session started between %A and %B, using mode %C.
A is the primary LU.
B is the remote LU.
C is the mode used.
34000630: Session started between %A and %B, using mode %C.
A is the primary LU.
B is the remote LU.
C is the mode used.
34000640: LU_PNCP session ended normally, %A.
34000650: LU_SSCP session ended normally, %A.
34000660: LU_PNCP session ended abnormally, %A.
34000670: LU_SSCP session ended abnormally, %A.
34000680: Session ended between %A and %B, using mode %C.
A is the primary LU.
B is the remote LU.
C is the mode used.
34000690: Session ended between %A and %B, using mode %C.
A is the primary LU.
B is the remote LU.
C is the mode used.
34000700: BIND rejected by partner—sense code = %A.
A is the sense data sent by the partner.
Action: Change the configuration, either at your site or at the partner site.
34000710: NOTIFY received from host—session activation failed.
34000720: Initself rejected by host, sense code=%A%B.
A is check sense.
B is check sense extension.
The following messages are sent by the PU to inform of changes in the conditions of the lines and stations. Some of these messages are informational only. When a message refers to “sense data,” it is specifying the SNA-defined error code that covers the condition. Refer to SNA reference manuals for more information on these errors.
35000180: XID rejected, ID %A did not match.
A is the incorrect exchange ID (XID).
Action: Your configuration does not match your partner's. The EXCHID in the Remote Node block does not match the EXCHID that your partner sent. Contact your partner and reset the configurations.
35000190: XID rejected, not in proper state.
35000200: XID rejected, both stations want to be primary.
35000210: XID rejected, both stations want to be secondary.
35000220: XID rejected, BTU size %A less than the minimum %B.
A is the actual BTU size.
B is the minimum BTU size.
35000230: XID rejected, frame count less than 1.
35000240: XID rejected, frame count greater than 7.
35003020: ACTLINE %A completed abnormally, superseded.
A is the name of the line.
35003021: ACTLINE %A completed abnormally, sense code %B, errno %C.
A is the name of the line.
B is the sense code data.
C is the UNIX/IRIX errno value.
35003022: ACTLINE %A completed normally.
A is the name of the line.
35003030: ACTSTA %A completed abnormally, superseded.
A is the name of the station.
35003031: ACTSTA %A completed abnormally, sense code %B, errno %C.
A is the name of the station.
B is the sense code data.
C is the UNIX errno value.
35003032: ACTSTA %A completed normally.
A is the name of the station.
35003033: Please dial telephone number %A.
A is the telephone number.
35003040: DCTLINE %A completed abnormally, superseded.
A is the name of the line.
35003041: DCTLINE %A completed abnormally, sense code %B, errno %C.
A is the name of the line.
B is the sense code data.
C is the UNIX errno value.
35003042: DCTLINE %A completed normally.
A is the name of the line.
35003050: DACTSTA %A completed abnormally, superseded.
A is the name of the station.
35003051: DACTSTA %A completed abnormally, sense code %B, errno %C.
A is the name of the station.
B is the sense code data.
C is the error number.
35003052: DACTSTA %A completed normally.
A is the name of the station.
35003511: PU successfully activated.
35003512: PU activation unsuccessful, sense code %A %B.
A is the first part of the sense code data.
B is the second part of the sense code data.
35003513: PU successfully deactivated.
35003514: PU deactivation unsuccessful, sense code %A %B.
A is the first part of the sense code data.
B is the second part of the sense code data.
35003515: LU %A successfully activated.
A is the name of the LU.
35003516: LU %A activation unsuccessful, sense code %B %C.
A is the name of the LU.
B is the first part of the sense code data.
C is the second part of the sense code data.
35003517: LU %A successfully deactivated.
A is the name of the LU.
35003518: LU %A deactivation unsuccessful, sense code %B %C.
A is the name of the LU.
B is the first part of the sense code data.
C is the second part of the sense code data.
35003521: Link %A successfully activated.
A is the name of the link.
35003522: Link %A activation unsuccessful, sense code %B, errno %C.
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003523: Link %A successfully deactivated.
A is the name of the link.
35003524: Link %A deactivation unsuccessful, sense code %B, errno %C.
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003525: Station %A successfully discontacted.
A is the name of the station.
35003526: Station %A discontact unsuccessful, sense code %B, errno %C.
A is the name of the station.
B is the sense code data.
C is the error number.
35003529: Station %A contact unsuccessful, sense code %B, errno %C.
A is the name of the station.
B is the sense code data.
C is the error number.
35003530: Station %A successfully contacted.
A is the name of the station.
35003531: Station %A contact unsuccessful, sense code %B, errno %C.
A is the name of the station.
B is the sense code data.
C is the error number.
35003532: Station %A CONTACT request successful.
A is the name of the station.
35003533: Station %A CONTACT request unsuccessful, sense code %B, errno %C
A is the name of the station.
B is the sense code data.
C is the error number.
35003534: Link %A ACTCONNIN request successful.
A is the name of the link.
35003535: Link %A ACTCONNIN request unsuccessful, sense code %B, errno %C
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003536: Link %A DACTCONN request successful.
A is the name of the link.
35003537: Link %A DACTCONN request unsuccessful, sense code %B, errno %C
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003538: Link %A CONNOUT request successful.
A is the name of the link.
35003539: Link %A CONNOUT request unsuccessful, sense code %B, errno %C
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003540: Link %A ABCONNOUT request successful.
A is the name of the link.
35003541: Link %A ABCONNOUT request unsuccessful, sense code %B, errno %C
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003542: Link %A ABCONN request successful.
A is the name of the link.
35003543: Link %A ABCONN request unsuccessful, sense code %B, errno %C.
A is the name of the link.
B is the sense code data.
C is the UNIX errno value.
35003544: Link %A inoperative, retry count exceeded.
A is the name of the link.
Action: Deactivate and reactivate the line. If the problem persists, increase the retry count.
35003545: Link %A inoperative, protocol error.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003546: Link %A inoperative, BTU length error.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003547: Link %A inoperative, SDLC address error.
A is the name of the link.
Action: Deactivate and reactivate the line. Consult the administrator of the other system and agree on the SDLC address.
35003548: Link %A inoperative, invalid element address.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003549: Link %A inoperative, I/O error.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003550: Link %A inoperative, time out.
A is the name of the link.
Action: Deactivate and reactivate the line. If the problem persists, increase the time-out value.
35003551: Link %A inoperative, overflow.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003552: Link %A inoperative, insufficient buffers.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003553: Link %A inoperative.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003555: Link %A XID request sent.
A is the name of the link.
35003556: Link %A inoperative, DSR dropped.
A is the name of the link.
Action: The physical connection has been broken. Tighten cables and deactivate and reactivate the line.
35003557: Link %A inoperative, Waiting for CTS.
A is the name of the link.
Action: Deactivate and reactivate the line. If the problem persists, increase the Clear-To-Send timeout.
35003558: Link %A inoperative, CTS dropped.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003559: Link %A inoperative, Too many aborts sent.
A is the name of the link.
Action: Deactivate and reactivate the line. Check the speed setting and full/half-duplex setting in the line definition.
35003560: Link %A inoperative, Non-productive receive.
A is the name of the link.
Action: Deactivate and reactivate the line. If the problem persists, increase the nonproductive receive count.
35003561: Link %A inoperative, No activity on line.
A is the name of the link.
Action: Deactivate and reactivate the line.
35003562: Link %A switched connection established.
A is the name of the link.
35003644: Station %A inoperative, retry count exceeded.
A is the station name.
Action: Reactivate the station. If the problem persists, increase the retry count.
35003645: Station %A inoperative, protocol error.
A is the station name.
Action: Reactivate the station.
35003646: Station %A inoperative, BTU length error.
A is the station name.
Action: Reactivate the station.
35003647: Station %A inoperative, SDLC address error.
A is the station name.
Action: Reactivate the station. Consult with the administrator of the other system to agree on the SDLC address.
35003648: Station %A inoperative, invalid element address.
A is the station name.
Action: Reactivate the station.
35003649: Station %A inoperative, I/O error.
A is the station name.
Action: Reactivate the station.
35003650: Station %A inoperative, time out.
A is the station name.
Action: Reactivate the station. If the problem persists, increase the time-out value.
35003651: Station %A inoperative, overflow.
A is the station name.
Action: Reactivate the station.
35003652: Station %A inoperative, insufficient buffers.
A is the station name.
Action: Reactivate the station.
35003653: Station %A inoperative.
A is the station name.
Action: Reactivate the station.
35003656: Station %A inoperative, DSR dropped.
A is the station name.
Action: The physical connection has been broken. Tighten cables and reactivate the station.
35003657: Station %A inoperative, Waiting for CTS.
A is the station name.
Action: Reactivate the station. If the problem persists, increase the Clear-To-Send time-out.
35003658: Station %A inoperative, CTS dropped.
A is the station name.
Action: Reactivate the station.
35003659: Station %A inoperative, Too many aborts sent.
A is the station name.
Action: Reactivate the station. Check the speed setting and full/half-duplex setting in the line definition.
35003660: Station %A inoperative, Non-productive receive.
A is the station name.
Action: Reactivate the station. If the problem persists, increase the non-productive receive count.
35003661: Station %A inoperative, No activity on station.
A is the station name.
Action: Reactivate the station.
These messages indicate program errors by the Silicon Graphics IRIS SNA SERVER or the software with which it is communicating. It is unlikely that these errors appear in the log, and there is not much you can do about them if they do. They are included here for identification only. If these messages do appear in the log, note the message ID, related messages, and what the system was doing when the message occurred. This information can help customer support diagnose the error conditions.
15000001: No match found in FSM %A, state %B, input %C.
A is the name of the FSM.
B is the state of the FSM.
C is the input vector.
15000002: Send/receive check in FSM %A, state %B, line %C.
A is the name of the FSM.
B is the state of the FSM.
C is the input vector.
15000003: Condition cannot occur in FSM %A, state %B, line %C.
A is the name of the FSM.
B is the state of the FSM .
C is the input vector.
33000010: Invalid Response.
33000050: Negative Response from DFC.SEND.
33000060: Short Form MU Uncarved spp1420.
33000070: Unexpected pacing response received.
33000080: Unexpected pacing RQ received.
33000090: RU length error.
33000100: DFC receive check received.
34000010: Neg INITHS in FSM.BIND.
34000020: Unexpected RU received by LNS.
34000030: Strange MU at LNS. DEACTIVATION
34000040: DEACT-SESS without session.
34000050: Q_PS_LUS empty.
34000060: TCB not found.
34000070: Data/DFC MUCB bound for SPS without SCB.
34000080: RU type not supported by RM.RCV.
34000100: RTR request sequence error, sense data sent.
34000110: Unexpected RTR response discarded.
34000120: LU name-mode name combination not found.
34000130: Mode limits are 0 and DRAIN is NO.
34000140: No SCB available.
34000150: RCB creation failed.
34000160: Session limit exceeded.
34000230: pacb set failed.
34000290: Invalid parameter ABORTHS.
35000010: Unrecognized RU.
35000020: Invalid DRCB.
35000030: Invalid DRCB.
35000040: Invalid DRCB.
35000050: Invalid DRCB.
35000060: Invalid DRCB.
35000070: Invalid DRCB.
35000080: Invalid DRCB.
35000150: ALS inactive, rsp discarded.
35000160: Invalid Internal RU.
35000170: Invalid other RU type.
35003554: ORE: %A.
A is the name of the link.
Low-level messages record flows between s2_schd and the SDLC device. The %A parameters in numbers 10 through 36 are dumps of the messages exchanged; the %B parameters are link addresses. The substitution parameters in the subsequent messages are either dumps or link addresses. The “?” indicates that an unrecognized command was sent.
35003710: Sent ???????? (%A) SIG TO link ea=%B
35003711: Sent ALS_RSET(%A) SIG TO link ea=%B
35003712: Sent CONTACT (%A) SIG TO link ea=%B
35003713: Sent XIDSIG (%A) SIG TO link ea=%B
35003714: Sent LNK_RSET (%A) SIG TO link ea=%B
35003720: Sent ???????? (%A) RQS TO link ea=%B
35003721: Sent ACTLINK (%A) RQS TO link ea=%B
35003722: Sent DACTLINK (%A) RQS TO link ea=%B
35003723: Sent DISCONTC (%A) RQS TO link ea=%B
35003724: Sent CONNOUT (%A) RQS TO link ea=%B
35003725: Sent ACTCONNIN (%A) RQS TO link ea=%B
35003726: Sent ABCONNOUT (%A) RQS TO link ea=%B
35003727: Sent DACTCONN (%A) RQS TO link ea=%B
35003728: Sent ABCONN (%A) RQS TO link ea=%B
35003730: Rcvd ???????? (%A) SIG FROM link ea=%B
35003731: Rcvd ALSRECMP (%A) SIG FROM link ea=%B
35003732: Rcvd CONOTSUC (%A) SIG FROM link ea=%B
35003733: Rcvd CONINSUC (%A) SIG FROM link ea=%B
35003734: Rcvd XIDSIG (%A) SIG FROM link ea=%B
35003735: Rcvd XIDCMP (%A) SIG FROM link ea=%B
35003736: Rcvd LNKRECMP (%A) SIG FROM link ea=%B
35003740: (%ARSP) ???????? (%B) RQS FROM link ea=%C
35003741: (%ARSP) ACTLINK (%B) RQS FROM link ea=%C
35003742: (%ARSP) DACTLINK (%B) RQS FROM link ea=%C
35003743: (%ARSP) DISCONTC (%B) RQS FROM link ea=%C
35003744: (%ARSP) CONNOUT (%B) RQS FROM link ea=%C
35003745: (%ARSP) ACTCONNIN (%B) RQS FROM link ea=%C
35003746: (%ARSP) ABCONNOUT (%B) RQS FROM link ea=%C
35003747: (%ARSP) DACTCONN (%B) RQS FROM link ea=%C
35003748: (%ARSP) ABCONN (%B) RQS FROM link ea=%C
35003751: Rcvd INOP (%A) RQS FROM link ea=%B
35003752: Rcvd CONTACTD (%A) RQS FROM link ea=%B