The ONC3/NFS Administrator's Guide documents the Silicon Graphics® Open Network Computing/Network File System (ONC3/NFS). ONC3/NFS is adapted from Sun Microsystems, Inc.'s ONC+ version 1.2, and was previously referred to as the Network File System (NFS). The purpose of this guide is to provide the information needed to set up and maintain the ONC3/NFS services. It explains ONC3/NFS software fundamentals and provides procedures to help you install, test, and troubleshoot ONC3/NFS on your network. It also contains planning information and recommendations for administering the service.
ONC+ has been optimized for use on Silicon Graphics systems, and has been integrated with the IRIS Indigo Magic™ environment and system toolchest. The Silicon Graphics implementation of ONC+ can run only on a Silicon Graphics system.
ONC3/NFS is made up of distributed services that allow users to access file systems and directories on remote systems and treat them as if they were local. Networks with heterogeneous architectures and operating systems can participate in the same ONC3/NFS service. The service can also include systems connected to different types of networks.
The components of ONC3/NFS are described below. Further information is provided in the following chapters.
The Network File System (NFS) is the distributed file system in ONC3/NFS.
The Cache File System (CacheFS) is a new file system type in IRIX 5.3 that provides client-side caching for NFS and other file system types.
Table i contains a summary of each chapter in this guide and suggests how to use the chapter.
When to Read
Introduces the vocabulary of ONC3/NFS, and the fundamentals of ONC3/NFS operation.
Read this chapter if you are new to ONC3/NFS. If you already have ONC3/NFS experience, you can skip Chapter 1.
Explains ONC3/NFS processes and their options in detail.
You should be thoroughly familiar with the information in this chapter before continuing with Chapter 4, “Setting Up and Testing ONC3/NFS.”
Describes special features of the automounter.
Read this chapter if you plan to customize your automount environment.
Contains procedures for implementing ONC3/NFS on server and client systems and verifying their operation.
Use this chapter as a guide to implementing the ONC3/NFS service on your network.
Contains procedures for changing the parameters in ONC3/NFS after it is in service.
Use these procedures for routine upkeep of ONC3/NFS.
Provides general problem-solving information and check-out procedures. Also describes specific problems that can occur with ONC3/NFS and suggests what you can do to correct them.
Use this chapter to diagnose and correct ONC3/NFS problems. Some of the suggestions in this chapter require an understanding of other network software, such as NIS.
Explains the interactions between the ONC3/NFS lock manager and IRIX kernel. It also gives a detailed description of ONC3/NFS daemons.
Read this appendix if you need a detailed understanding of how the lock manager or ONC3/NFS daemon processes work.
To use the setup and maintenance information in this guide, you should have experience in the following areas:
Setting up network services
Assessing the needs of network users
Maintaining hosts databases
Understanding the UNIX® file system structure
Using UNIX editors
To troubleshoot ONC3/NFS, you should be familiar with these concepts:
Theory of network services
Silicon Graphics network implementation
You can find supplementary information in these documents:
IRIX Advanced Site and Server Administration Guide (Silicon Graphics publication) explains the fundamentals of system and network administration for Silicon Graphics systems on a local area network.
NIS Administration Guide (Silicon Graphics publication) explains how to set up and maintain Silicon Graphics implementation of the network information service.
IRIX Network Programming Guide (Silicon Graphics publication) explains the programmatic interfaces to ONC3/NFS.
Diskless Workstation Administration Guide (Silicon Graphics publication) describes the setup and maintenance of diskless workstations.
Defense Data Network Protocol Handbook, available from the Network Information Center, 14200 Park Meadow Dr., Suite 200, Chantilly, VA 22021. This three-volume set contains information on TCP/IP and UDP/IP.
Stern, Hal Managing NFS and NIS O'Reilly & Associates, Inc. 1991. This book contains detailed, but not Silicon Graphics-specific, information about NFS and how to administer and use it.
Filenames, variables, IRIX command arguments, command flags, host names, user IDs, map names, the first use of new terms, titles of publications, icon names
Code examples, file excerpts, and screen displays (including error messages), and /etc/export and /etc/fstab options
|Bold Screen type|
(Parentheses) Following IRIX commands, they surround the reference page (man page) section where the command is described
(Brackets) Surround optional syntax statement arguments
IRIX shell prompt for the superuser (root)