Intel C++ Compiler User's Guide (c_ug_lnx.pdf).

Intel Fortran Compiler User's Guide (for_ug_lnx.pdf).

Intel Fortran Programmer's Reference (for_prg.pdf).

Intel Fortran Libraries Reference (for_lib.pdf).

Intel Itanium 2 Processor Reference Manual for Software Development and Optimization, available online at http://developer.intel.com/design/itanium2/manuals/251110.htm.

Intel Itanium Architecture Software Developer's Manual, available online at http://developer.intel.com/design/itanium/manuals/iiasdmanual.htm.

Introduction to Itanium Architecture, available online at http://shale.intel.com/softwarecollege/CourseDetails.asp?courseID=13
(secure channel required).

Linux Device Driver Programmer's Guide- Porting to SGI Altix Systems

Provides information on programming, integrating, and controlling drivers.

Porting IRIX Applications to SGI Altix Platforms: SGI ProPack for Linux

Provides information about porting an application to the SGI Altix platform.

Message Passing Toolkit (MPT) User's Guide

Describes industry-standard message passing protocol optimized for SGI computers.

Origin 2000 and Onyx2 Performance Tuning and Optimization Guide

Contains information specific to MIPS/IRIX systems, but the general guidelines in the document are hardware and operating system independent.

Performance Co-Pilot for IA-64 Linux User's and Administrator's Guide

Describes the Performance Co-Pilot (PCP) software package of advanced performance tools for SGI systems running the Linux operating system.

Linux Configuration and Operations Guide

Provides information on how to perform system configuration and operations for SGI ProPack servers.

Linux Resource Administration Guide

Provides a reference for people who manage the operation of SGI ProPack servers and contains information needed in the administration of various system resource management features such as Comprehensive System Accounting (CSA), Array Services, CPU memory sets and scheduling, and the Cpuset System.

SGI Altix 350 System User's Guide

Provides an overview of the Altix 350 system components, and it describes how to set up and operate this system.

SGI Altix 350 Quick Start Guide

Guides a knowledgeable user through the installation, setup, and simple configuration of most SGI Altix 350 systems.

SGI Altix 3000 User's Guide

Provides an overview of the architecture and describes the major components of the SGI Altix 3000 family of servers and superclusters. It also describes the standard procedures for powering up and powering down the system, provides basic troubleshooting information, and includes important safety and regulatory specifications.

SGI Altix 3700 Bx2 User's Guide

This guide provides an overview of the architecture and descriptions of the major components that compose the SGI Altix 3700 Bx2 family of servers. It also provides the standard procedures for powering on and powering off the system, basic troubleshooting information, and important safety and regulatory specifications.

Silicon Graphics Prism Visualization System User's Guide

Provides an overview of the Silicon Graphics Prism Visualization System components, and it describes how to set up and operate this system.

Silicon Graphics Prism Deskside Visualization System User's Guide

Provides an overview of the Silicon Graphics Prism Deskside Visualization System components, and it describes how to set up and operate this system.

SGI ProPack 3 for Linux Service Pack 6 Release Notes

Provides the latest information about software and documentation in this release. The release notes are on the SGI ProPack for Linux Documentation CD in the root directory, in a file named README.TXT.

SGIconsole 2.1 Start Here

Provides an introduction to SGIconsole and information about setting up and configuring SGIconsole hardware and software.

Console Manager for SGIconsole Administrator's Guide

Provides information about the Console Manager software graphical interface allows you to control multiple SGI servers, SGI partitioned systems, and large single-system image servers.

SGI L1 and L2 Controller Software User's Guide

Describes how to use the L1 and L2 controller commands at your system console to monitor and manage the SGI Altix 3000 family of servers and superclusters and SGI Altix 350 systems.

XFS for Linux Administration

Describes XFS, an open-source, fast recovery, journaling filesystem that provides direct I/O support, space preallocation, access control lists, quotas, and other commercial file system features.

XVM Volume Manager Administrator's Guide

Describes the configuration and administration of XVM logical volumes

using the XVM Volume Manager.

Event Manager User Guide

Provides information about the Event Manger application that collects event information from other applications. This document describes the Event Manager application, the application programming interface that you can use to access it, the procedures that you can use to communicate with it from another application, and the commands that you can use to control it.

Embedded Support Partner User Guide

Provides information about using the Embedded Support Partner (ESP) software suite to monitor events, set up proactive notification, and generate reports. This revision of the document describes ESP version 3.0, which is the first version of ESP that supports the Linux operating system.

Linux Application Tuning Guide

Provides information about tuning application programs on SGI Altix systems. Application programs include Fortran and C programs written on SGI Linux systems with the compilers provided by Intel.

SCSL User's Guide

Provides information about the scientific libraries on SGI Altix systems and SGI IRIX systems. Topics include discussions about BLAS, LAPACK, and FFT routines.

SGI OpenGL Multipipe User's Guide

Describes the OpenGL Multipipe product, which allows you to run single-pipe applications in a multipipe environment without modification.

OpenGL Performer Getting Started Guide

Introduces the most important concepts and classes in the OpenGL Performer library.

OpenGL Performer Programmer's Guide

Provides information about OpenGL Performer that is a programming interface (with ANSI C and C++ bindings) for creating real-time graphics applications and offers high-performance, multiprocessed rendering in an easy-to-use 3D graphics toolkit.

SGI OpenGL Vizserver Administrator's Guide

This document is intended for system administrators and gives information about installing, configuring, tuning, and troubleshooting OpenGL Vizserver.

SGI OpenGL Vizserver User's Guide

Provides information about OpenGL Vizserver, you can interact with images and three-dimensional models utilizing the capabilities of remote SGI servers.

SGI OpenGL Volumizer 2 Programmer's Guide

Documents OpenGL Volumizer 2, a C++ volume rendering toolkit optimized for SGI scalable servers. It provides the developer with the tool set needed to solve the problems inherent in high-quality, interactive volume rendering of large datasets. This guide gives an introduction to the OpenGL Volumizer 2 application programming interface (API) and examples of its use.

OpenGL Volumizer 2 Reference Pages

Provides reference page information for OpenGL Volumizer 2.

OpenGL on Silicon Graphics Systems

Explains how to use the OpenGL graphics library on Silicon Graphics systems. This guide expands the description of OpenGL programming presented in the book OpenGL Programming Guide, which describes aspects of OpenGL that are implementation-independent.